Siemens TC65 Specifications download pdf (Page 55)

TC65 Hardware Interface Description

Confidential / Released

TC65_HD_V02.000 Page 55 of 120 08.06.2006

3.11 Serial Interface ASC1

The ASC1 interface is available as a 4-wire unbalanced, asynchronous modem interface

ASC1 conforming to ITU-T V.24 protocol DCE signalling. The electrical characteristics do not

comply with ITU-T V.28. The significant levels are 0V (for low data bit or active state) and

2.9V (for high data bit or inactive state). For electrical characteristics please refer to

Table

26.

TC65 is designed for use as a DCE. Based on the conventions for DCE-DTE connections it

communicates with the customer application (DTE) using the following signals:

• Port TXD @ application sends data to module’s TXD1 signal line

• Port RXD @ application receives data from the module’s RXD1 signal line

Figure 17: Serial interface ASC1

Features

• Includes only the data lines TXD1 and RXD1 plus RTS1 and CTS1 for hardware

handshake.

• On ASC1 no RING line is available. The indication of URCs on the second interface

depends on the settings made with the AT^SCFG command. For details refer to

[1].

• Configured for 8 data bits, no parity and 1 or 2 stop bits.

• ASC1 can be operated at fixed bit rates from 300 bps to 460800 bps. Autobauding is not

supported on ASC1.

• Supports RTS1/CTS1 hardware flow control and XON/XOFF software flow control.

Table 14: DCE-DTE wiring of ASC1

DCE DTE V.24

circuit

Pin function Signal direction Pin function Signal direction

103 TXD1 Input TXD Output

104 RXD1 Output RXD Input

105 RTS1 Input RTS Output

106 CTS1 Output CTS Input

TXD1

RXD1

RTS1

CTS1

TXD

RXD

RTS

CTS

GSM Module (DCE) Application (DTE)

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 119 120

No comments

Siemens TC65 Specifications Page 55