Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
104 Deleting an SNMP User
Section 5.2.1.3
Deleting an SNMP User
To delete an SNMP user, do the following:
1. Navigate to Administration » Configure SNMP » Configure SNMP Users. The SNMP Users table
appears.
Figure 62: SNMP Users Table
2. Select the user from the table. The SNMP Users form appears.
Figure 63: SNMP Users Form
1. Name Box 2. IP Address Box 3. v1/v2c Community Box 4. Auth Protocol Box 5. Priv Protocol Box 6. Auth Key Box
7. Confirm Auth Key Box 8. Priv Key Box 9. Confirm Priv Key Box 10. Apply Button 11. Delete Button 12. Reload Button
3. Click Delete.
Comments to this Manuals