Siemens CP 1515 Operations Instructions download pdf (Page 53)

Configuration Using Web Based Management and the Command Line Interface

Operating Instructions SCALANCE W 744-1PRO

C79000-G8976-C185-03

5.2.7 SNMP Config Menu Command

Configuration

Select the check boxes of the entries according to the SNMP functionality you want

to use. SNMP version 3 allows permissions to be assigned and protocol level, au-

thentication, and encryption. You specify groups and users in the Groups and Us-

ers submenus. You can also make entries there if the SNMPv3 enabled check box

is not selected, however the entries are not applied.

Notice

When using SNMP version 3, you should disable SNMP V1 and V2 because the

security settings of SNMP V3 can be bypassed by access over SNMP V1 or V2.

Trap Submenu

Here, you enter the IP addresses of up to 10 trap receivers. The

SCALANCE W744 sends a trap to all the addresses you enter if their Enable trap

check boxes are selected.

Groups Submenu

This page displays the SNMPv3 groups. You can create a new group by clicking

the New button and specifying the group name, the security level, and the write or

read permissions.

You can delete a group by selecting the check box in the Del column and clicking

the Set Values button. If members are already entered in the group, you cannot de-

lete the group nor is it possible to change the security level of the group.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 103 104

No comments

Siemens CP 1515 Operations Instructions Page 53