Siemens CP 1515 Operations Instructions download pdf (Page 38)

Configuration with the Primary Setup Tool

Operating Instructions SCALANCE W 744-1PRO

38 C79000-G8976-C185-03

3. Decide how the device will obtain its IP address:

● Dynamically from a DHCP server:

Select the Obtain IP address from DHCP server option button.

● Manual assignment by the user:

Select the Assign IP parameters option button.

4. Make the following entries if you have decided to assign the IP address manu-

ally:

● Enter the IP address for the device in the IP Address box. In each part of

the address separated by the periods, you can enter a number between 0

and 255; the program does not accept any other numbers.

● Enter the subnet mask in the Subnet Mask box.

● If necessary, select the Use router check box and enter the IP address of

the router in the text box. Router information is necessary if the computer

on which you are creating the configuration is not in the same subnet as

the SCALANCE W744.

Downloading to the Module

Follow the steps below to transfer the configuration data to the device:

1. Select the module to which you will download the configuration data in the left-

hand pane of the program window. As long as an interface is selected and the

input dialog for the configuration data is displayed, no download is possible.

2. Start the download with the steps outlined below:

● Select the Module > Download menu command.

● Click the second icon from the left in the toolbar (S7 modules with yellow

arrow).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 103 104

No comments

Siemens CP 1515 Operations Instructions Page 38