Siemens SPC3 Specifications download pdf (Page 12)

Introduction To ProfiBus DP

__________________________________________________________________

_______________________________________________________________________________________

Acromag, Inc. Tel:248-624-1541 Fax:248-624-9234 Email:sales@acromag.com http://www.acromag.com

To give you an idea of what a GSD file might look like, consider the

following partial GSD file taken from Acromag Model 983PB-2012.

#Profibus_DP

GSD_Revision = 1 ; Version of the GSD file

Vendor_Name = “Acromag, Inc.” ; Vendor name

Model_Name = “983PB-2012” ; Product name

Revision = “A”

Ident_Number = 0x06F1 ; Ident Number

Protocol_Ident = 0 ; ProfiBus DP Only (1-DP/FMS)

Station_Type = 0 ; Type of device (Slave)

Hardware_Release = “A” ; Hardware version of the device

Software_Release = “A” ; Software version of the device

;

9.6_supp = 1 ; 9600bps Supported

19.2_supp = 1

93.75_supp = 1

187.5_supp = 1

500_supp = 1

1.5M_supp = 1

3M_supp = 1

6M_supp = 1

12M_supp = 1

MaxTsdr_9.6 = 60 ; Maximum response time

MaxTsdr_19.2 = 60 ; at different baud rates.

MaxTsdr_93.75 = 60

MaxTsdr_187.5 = 60

MaxTsdr_500 = 100

MaxTsdr_1.5M = 150

MaxTsdr_3M = 250

MaxTsdr_6M = 450

MaxTsdr_12M = 800

;

Redundancy = 0 ; Redundancy Not Supported

Repeater_Ctrl_Sig = 2 ; Includes RTS Support w/TTL

Implementation_Type = “SPC3” ; Uses Siemens SPC3 ASIC

24V_Pins = 0 ; Does Not Include 24V

Fail_Safe = 1 ; Supports Fail-Safe Mode

Freeze_Mode_supp = 1 ; Supports FREEZE

Sync_Mode_supp = 1 ; Supports SYNC

Auto_Baud_supp = 1 ; Includes Auto Baud Detection

Set_Slave_Add_supp = 1 ; Addr can be set via ProfiBus

User_Prm_Data_Len = 3

User_Prm_Data = 0x00,0x00,0x00 ; Module Specific Parameters

; 00H = Set outputs to 0

; 01H = Maintain Last Output Values

; 02H = Set output to user-defined values in bytes 1 and 2

; Byte 1 is the lower byte of user-defined output data which is outputs 0 to 7

; Byte 2 is the upper byte of user-defined output data which is outputs 8 to 11

;

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Comments to this Manuals

No comments

Siemens SPC3 Specifications Page 12

Comments to this Manuals

Related products and manuals for Networking Siemens SPC3