Siemens Profiset 3030 User Manual download pdf (Page 17)

Functions used for making calls

Step by step

Functions used for making calls

Making Calls

Considerations

• When authorized, it allows you to call external num-

bers

on a public network.

• The HiPath 1100 can also be programmed to require

pressing the "Internal" key before an internal number

can be dialed. When this occurs, there is no need to

enter an external line access code to dial an external

number ("Automatic seizure of an external line"

Check with your system’s support technician.

• Ask your support technician for the required internal

numbers, public network access codes as well as

information about activated features and available

extensions.

• Depending on how the HiPath 1100 is programmed

(ask the system’s technical support team) it will au-

tomatically select the most economical route for

making an external call (LCR - Least Cost Routing).

When an LCR is not available, the non-default carrier

name or "EXPENSIVE CONN" appears on the dis-

play, and a warning tone is emitted.

• On system telephones volume control is adjusted

individually on each set during calls.

[1] See the chapter Important Programming Data - Classes of Service

in Programming manual.

[2] It allows the user to dial an external call directly, without having to

dial an external access code (e.g 0). If a continuous dialing tone is

heard when the handset is lifted, it means that Automatic Seizure

Mode is activated (see Programming na External Line - Automatic

Seizure of an external line, in the programming manual).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 136 137

No comments

Siemens Profiset 3030 User Manual Page 17