Siemens HIPATH 1190 User Manual download pdf (Page 17)

Using the HiPath 1100 Features

System signaling tones

During feature configuration the system uses the following signaling tones:

To n e M e a n i n g

Internal dialing tone The system is ready to receive and send call information.

Signaling tone Connection established. Ring signal is being applied to

phone number.

Dial tone Network accepted information request and is sending a re-

quest for more information.

Busy signal It indicates to the caller that the number is busy.

It is also used when the destination cannot be accessed

(e.g., invalid number).

External false signal The dial tone that is heard is not from the carrier

Call Waiting Signaling Tone It indicates to the user having a conversation that there is

another call ringing.

Call Waiting tone for Door

Opener

It indicates to the user having a conversation that someone

is requesting the Door Opener to open the door.

Confirmation tone The procedure was successfully completed and accepted.

Rejection tone The procedure is invalid and was not accepted.

Override tone It alerts the user having a conversation that the call’s priva-

cy was violated (override).

Conference tone It indicates that a new participant joined the conversation.

Recall confirmation tone It confirms a callback.

Alert signal It alerts the called party when the Speakerphone Auto-An-

swering and Paging features are enabled.

Special Dial Tone Indicates that a service is activated (Night Service, Elec-

tronic Lock, Do Not Disturb, etc.)

Auto-Answering Tone After a Direct Communication Call is established.

oi.book Seite 17 Mittwoch, 16. August 2006 8:41 08

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 126 127

No comments

Siemens HIPATH 1190 User Manual Page 17