Siemens Gigaset SE587 WLAN dsl Specifications download pdf (Page 61)

Local network configuration

Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007

Schablone 2004_08_26

ì Then enter the ipconfig /renew command and press the ENTER key.

If the default IP address of the router/access point (192.168.1.1) was not changed, the

IP address should now read 192.168.1.x (with x being a number between 2 and 254).

The Subnet Mask must always be the same as that set on the Gigaset SE587 WLAN dsl

(normally 255.255.255.0) and the Default Gateway must have the IP address of the

router/access point (192.168.1.1). These values confirm that your Gigaset SE587 WLAN

dsl is working.

ì Enter exit and press the Enter key to close the Command Prompt window.

Information for Windows Vista:

Windows Vista requires more advanced rights to execute this command (even if your

user account has administrator rights). Carry out the following steps:

ì Click Start.

ì Enter Command prompt in the search box.

ì Right-click Command Prompt in the result list and select Run as administrator.

ì If prompted to enter the administrator password or a confirmation, then do this.

The command prompt is opened and you can execute the command.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 88 89

No comments

Siemens Gigaset SE587 WLAN dsl Specifications Page 61