68
Appendix
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / appendix.fm / 12.12.2007
Schablone 2004_08_26
No connection to the
Gigaset SE587 WLAN
dsl's configuration
interface.
ì Use the ping command to check whether you can
establish a network connection to the Gigaset SE587
WLAN dsl.
ì Check the network cable between the PC you want to
use to manage the device and the Gigaset SE587 WLAN
dsl.
ì If the PC you want to use is in the router's local network,
make sure that you are using the correct IP address
administration (see above).
ì If the PC you want to use is not in the router's local net-
work, it must be authorised via Remote Management.
Password forgotten or
lost
ì Reset the Gigaset SE587 WLAN dsl (see page 5).
Warning: Please bear in mind that this will return all the
configuration settings to the factory settings.
You cannot access a
resource (drive or
printer) on another PC.
ì Make sure that the network is configured correctly on
all the PCs in the local network and that the PCs all
belong to the same workgroup.
ì Check whether the resource has been released on the
PC in question and whether you have the necessary
access rights.
ì Printing: Check whether the printer has been set up as a
network printer.
The transmission rate is
too low. For example,
there are pixel errors
with video streaming.
ì Radio data transmission depends on the operating envi-
ronment, for example the building stock or the influ-
ence of other devices in the vicinity that transmit in the
2.4-GHz frequency range.
ì Arrange your wireless devices closer together.
ì Change the antenna direction.
ì Position the device elsewhere.
ì Switch off other radio sources in the vicinity. They may
interfere with data transmission.
ì Choose a different channel.
ì Check to see if the problem also arises with a different
type of encryption.
Symptom Possible cause and remedial actions
Comments to this Manuals