Siemens Gigaset SE587 WLAN dsl Specifications download pdf (Page 9)

The Gigaset SE587 WLAN dsl

Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / introduction.fm / 12.12.2007

Schablone 2004_08_26

Configuring the local network

In order to communicate via the Gigaset SE587 WLAN dsl, the network configuration

may have to be set up correctly on the connected PCs.

This usually occurs automatically with

u Windows Vista (32 and 64)

u Windows XP

u Windows 2000 or

u Mac OS X

operating systems provided you have not made any changes to the standard settings for

the network configuration.

With Windows 98 SE or ME initial network configuration may be necessary.

If you require information on how to configure computers correctly for working in a

Local Network (LAN) or in a Wireless Local Access Network (WLAN), please refer to the

chapter "Local network configuration" on page 36.

Trademarks

Microsoft, Windows Vista, Windows XP, Windows 2000 and Internet Explorer are

registered trademarks of Microsoft Corporation.

Mac OS X is a registered trademark of Appel Inc.

Mozilla Firefox is a registered trademark of the Mozilla Organization.

Information for experienced users

The default settings for your Gigaset SE587 WLAN dsl are:

– IP address: 192.168.1.1

– Subnet mask: 255.255.255.0

– Radio channel: Automatic

– SSID: individual preset

– Encryption: WPA-PSK (with pre-shared key), individual preset

The individual preset SSID and pre-shared key are shown on the label on the bottom

of the device (see page 4).

Important operation information

If you operate a SIP phone on your Gigaset SE587 WLAN dsl please mind that it will

maintain the Internet connection even if it is in stand-by mode. This can result in

high connection charges if you are on a time-based or volume-based tariff. In this

case it is recommended to use a flat-rate tariff.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 88 89

No comments

Siemens Gigaset SE587 WLAN dsl Specifications Page 9