Siemens Gigaset SE587 WLAN dsl Specifications download pdf (Page 62)

Local network configuration

Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007

Schablone 2004_08_26

Windows 98 SE, ME

ì Click Start – Run.

ì Enter WINIPCFG and click OK.

There may be a slight delay before the IP Configuration window appears.

ì Select your network adapter from the selection list.

ì Click Release and then Renew.

If the default IP address of the router/access point (192.168.1.1) was not changed, the

IP address should now read 192.168.1.x (with x being a number between 2 and 254).

The Subnet Mask must always be the same as that set on the Gigaset SE587 WLAN dsl

(normally 255.255.255.0) and the Default Gateway must have the IP address of the

router/access point (192.168.1.1). These values confirm that your Gigaset SE587 WLAN

dsl is working.

ì Click OK to close the IP Configuration window.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 88 89

No comments

Siemens Gigaset SE587 WLAN dsl Specifications Page 62