Siemens Gigaset SE587 WLAN dsl Specifications download pdf (Page 57)

Local network configuration

Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007

Schablone 2004_08_26

ì Click OK.

ì Finish the network configuration with OK.

You may be prompted to insert your Windows installation CD. Follow the

instructions in the installation procedure.

Once the copying procedure is completed, you will be prompted to reboot your

system.

ì Click Yes. The PC will then be shut down and rebooted.

Assigning an IP address statically

If the DHCP server of your router/access point is not active or the PC is to be assigned a

static IP address for other reasons, the following settings must be made:

ì Select the option Specify an IP address on the IP Address tab.

ì Enter the IP address for the PC in the IP Address field.

ì Enter the subnet mask to be used in your network in the Subnet Mask field. You can

check these settings if necessary in the LAN configuration for your router/access

point.

ì Open the Gateway tab and enter the IP address of the router/access point in the

New gateway field or choose this, if available, from the Installed gateways list.

ì Open the DNS Configuration tab.

ì Select Enable DNS.

ì Enter the IP address for the router/access point in the DNS Server Search Order

field and click Add.