Siemens Gigaset SE587 WLAN dsl Specifications download pdf (Page 51)

Local network configuration

Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007

Schablone 2004_08_26

Obtaining an IP address automatically

If the DHCP server of your router/access point is active and the PC is to obtain its IP

address automatically, the Obtain an IP address automatically and Obtain DNS

server address automatically options must be activated.

ì Check whether these options are selected and mark them if necessary.

ì Click OK and close the following windows with OK to save your network

configuration.

Assigning an IP address statically

If the DHCP server of your router/access point is not active or the PC is to be assigned a

static IP address for other reasons, the following settings must be made:

ì Select the option Use the following IP address.

ì Enter the IP address for the PC in the IP address field.

ì Enter the subnet mask to be used in your network in the Subnet mask field. You can

check these settings if necessary in the LAN configuration for your router/access

point.

ì Enter the IP address for the router/access point in the Default gateway field.

ì Select the option Use the following DNS server addresses.

ì Enter the IP address for the router/access point in the Preferred DNS server field.

ì Click OK and then Close to close all windows.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 88 89

No comments

Siemens Gigaset SE587 WLAN dsl Specifications Page 51