2/10
Siemens RDF300…/RDF340.../RDF400… Room Temperature Controllers N3076en
Building Technologies 11 July 2008
Use
To control the room temperature in individual rooms and zones that are:
• Heated or cooled with 2-pipe fan coil units
• Heated or cooled with 2-pipe fan coil units with electrical heater
• Heated and cooled with 4-pipe fan coil units
• Heated or cooled with compressor in DX-type equipment
• Heated or cooled with compressor in DX-type equipment with electrical heater
• Heated and cooled with compressor in DX-type equipment
The RDF300…/RDF400… controls:
• One single or 3-speed fan
• One or two on/off valve actuators
• One on/off valve actuator and one 1-stage electrical heater
• One 3-position valve actuator
• One 1-stage compressor in DX-type equipment or one 1-stage compressor with
electrical heater
The RDF340… controls:
• One single or 3-speed fan
• One or two DC 0…10 V valve actuators
• One DC 0…10 V valve actuator and one modulating electrical heater (DC 0…10 V)
Use in systems with:
• Heating or cooling mode
• Automatic heating/cooling changeover
• Manual heating/cooling changeover
• Heating and cooling mode (e.g. 4-pipe system)
Functions
• Maintain room temperature via built-in temperature sensor or external room
temperature / return air temperature sensor
• Automatic or manual changeover between heating and cooling mode
• Select applications via DIP switches
• Select operating mode via the operating mode button on the controller
• Single or 3-speed fan control (automatic or manual)
• Display current room temperature or setpoint in °C and/or °F
• Minimum and maximum setpoint limitation
• Keypad lock (automatic and manual)
• Two multifunctional inputs, freely selectable for:
– Operating mode switchover contact (key card)
– Automatic heating/cooling changeover sensor
– External room temperature or return air temperature
– Dewpoint sensor
– Electrical heater enable
– Alarm input
• Advanced fan control function, i.e. fan kick, fan start, selectable fan operation
(enable, disable or depending on heating or cooling mode)
• Purge function together with 2-port valve in a 2-pipe changeover system
• Reminder to clean filters
• Floor heating temperature limit
• Reload factory settings for commissioning and control parameters
• Weekly time program: 8 programmable timers to switch over between Comfort and
Economy mode (RDF400.01)
• Optional backlit LCD (RDF300.02/RDF400.01)
• Optional infrared remote control ( RDF400.01)
pplications
Comments to this Manuals