Siemens optiPoint 400 User Manual download pdf (Page 61)

Displaying and Assigning Call Charges

Step by Step

Displaying and Assigning Call

Charges

Displaying Call Charges (Not for U.S.)

For the current call:

The display usually shows call charges at the end of a

call (default setting).

If you wish to display charges continuously during a call

in progress, your service personnel must request this

feature from your carrier.

Indication of the cost of a telephone call has to be re-

quested from the service provider and has to be in-

stalled by an authorised technician.

Depending on the setting, during or after the call, the

display will show the cost of the telephone call.

Some carriers also let you display toll-free external calls.

The message "Free of Charge" appears on the screen ei-

ther before or during the call.

If the cost indication facility has not been installed, the

display will show the dialled number and/or the length

of the telephone call.

For all calls and the last one conducted:

The connection charges for the last chargeable call con-

ducted are displayed first. Five seconds later, the total

accumulated connection charges appear.

Press the key. The LED lights up.

Select and confirm.

qji Enter the code.

If a call is transferred, the charges are assigned to

the telephone to which the call was transferred.

Program/Service

65=Show call charges?

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 118 119

No comments

Siemens optiPoint 400 User Manual Page 61