Siemens optiPoint 400 User Manual download pdf (Page 52)

Step by Step

Making Calls – Convenience Functions

If You Cannot Reach a Destination ...

Call Waiting (Camp-On)

Precondition: You have dialed an internal number and

hear a busy signal. It is important that you reach the

called party.

Wait (approx. 5 seconds) until "Camp-on" appears on the

display and the busy tone is followed by the ring tone.

The called party can then respond Æ Page 44

Busy Override - Joining a Call in Progress

This function is only available if it has been configured

by the service technician (contact your service person-

nel).

Precondition: You have dialed an internal number and

hear a busy signal. It is important that you reach the

called party.

Select and confirm.

qjf Enter the code.

The called party and person to whom this party is talk-

ing hear an alerting tone every two seconds.

If the called party has a system telephone with display,

the following appears on the screen: "Override: (station

no. or name)".

You can now start talking.

Camp-on

The called party can prevent automatic call

waiting Æ Page 45.

If this feature is configured (contact your service

personnel), you will hear the ring tone and the

message "Camp-on" is immediately displayed.

Override?

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 118 119

No comments

Siemens optiPoint 400 User Manual Page 52