Siemens SPCK422 User Manual download pdf (Page 3)

Functionalities

Full connectivity with tri-path

communications (PSTN, GSM/GPRS,

integral IP for SPC53xx)

Central station connectivity is a major part

of the security system. The SPC panels

support PSTN and GSM communication

with all the major communication formats

to standard alarm receivers and IP

communication (Ethernet with GPRS

backup) to SPC Com alarm receiving

software, prioritising of communication

channels based on a predefined strategy.

SPC supports also full connectivity for the

engineer / user with secure authentication

and rights management, via IP

broadband / local area network

(Ethernet), GSM or PSTN networks.

SMS text messaging via GSM module

enhances the ability to notify events or

alarms to the user. Moreover the user can

control the panel via SMS commands via

GSM.

Intuitive Configuration Facilities

The SPC panels provide easy and flexible

configuration facilities. Remote

configuration through any of the

communication channels by use of the

on-board Web Server or a PC with SPC Pro

Programming Software minimizes

expensive on-site engineering costs.

If off-site programming is not appropriate,

the PC web browser or SPC Pro can be

used with direct connection to the panel.

Engineer friendly menus with intuitive

interface along with system templates

make the SPC panel to one of the quickest

panels to program. In addition, the SPC

Fast Programmer can simply be plugged

on the SPC controller for setup using pre-

programmed configurations.

Cost saving automated remote

servicing and site administration

The optional SPCS320 Remote

Maintenance Server ensures a high

service quality at reduced costs. Without

intervention of an engineer the SPC panel

periodically sends automated technical

system checks to a server. The data can be

auto-analysed and printed; an ideal

support for existing or new service

agreements with customers.

And the optional SPCS410 SPC Safe Server

reduces costs to administer a large

installed panel base. The central SPC Safe

server always contains up-to-date

configuration files and provides direct

access for engineers and panels to the

common database. Configuration files can

be easily imported or exported to the

engineers PC, and with the SPC53xx any

configuration changes (e.g. changed PIN)

are automatically transmitted over IP

(Ethernet) to the server.

Reliable high-speed Expander Bus

(X-BUS) with loop topology

The high-speed Expander Bus (X-BUS with

307 kB/s) is a reliable backbone for large

system installations with up to 400 m

distance between each bus device. The

loop topology protects the system against

possible communication faults caused by

an interrupt or shortcut by isolating the

faulty branch in the loop.

Seamless integration of Intrunet

wireless detectors and remote

controls

Up to 120 Intrunet wireless detectors and

1 Intrunet remote control per user can be

addressed using the SiWay receivers as RF

access points throughout the system. The

wireless zones can be mixed and match

with wired zones for cost effective

installation with minimal wiring.

Designed to meet EN50131

(Grade 2 and Grade 3)

The SPC5000 is designed to meet the

European standard EN50131 and allow

installations according to Grade 2 or 3,

depending on the chosen controller type.

Customied processes with advanced

functions set

With the advanced functions set the SPC

can be adapted to customer specific

processes. The 32 individual calendar

based time channels with multiple on/off

switching patterns allow individual time

control of users, areas, inputs or outputs.

And the Cause&Effects programming

allows activation of outputs based on

freely definable trigger conditions

(combination of status change of zones,

system or area outputs, user PIN, Keypad

Quick Keys, calendars).

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Siemens SPCK422 User Manual Page 3

Comments to this Manuals

Related products and manuals for Numeric keypads Siemens SPCK422