Upgrading/Downloading Software
6-7
Industrial Ethernet OSM/ESM Network Management
C79000-G8976-C137-08
Note
Copy the program file to the TFTP server so that the TFTP client (OSM/ESM) has
access for the download.
Downloading
Follow the steps outlined below to download the firmware:
1. Make sure that all components (OSM/ESM, TFTP server, etc.) are started up
and functioning correctly.
2. Start a WBM (or CLI) session. (For more detailed information, refer to Chapter
3 or 4).
3. Make the following entries in the System menu or the in the System Save &
Load window:
S Enter the TFTP Server IP Address (the IP address of the TFTP server on
which the new OSM/ESM firmware is located)
S Enter the Firmware File Name (name and if applicable path of the file on
the TFTP server containing the new OSM/ESM firmware)
S Select the Start Download command.
Before the new firmware takes effect, you must restart the OSM/ESM.
Note
In the RM mode, the ring monitoring is deactivated during the TFTP download; in
other words the redundancy manager cannot react to breaks in the ring during the
download.
Comments to this Manuals