
/
/
2nd Edition/Revision 3 (3/4/04)
/
60
Part # 4
Part # 4
--
--
Heater & NTC (2)
Heater & NTC (2)
To remove right & left side panels:
# Remove two (2) T-20 Torx side panel screws from each side (through holes in trim strip).
# Carefully slide trim strips up and out of dishwasher. If side panels are removed carefully
to avoid damaging trim strips, then trim strips don’t need to be removed.
# Lift side panels up and out from dishwasher. Panels can be removed with trim strips.
To remove toe kick:
# Remove two (2) T-20 Torx screws from toe kick.
# Tilt toe kick out from under dishwasher.
HINT: The fascia panel and door don’t need to be
removed to access the heater & NTC. However, the
door must be removed to completely remove the tank.
Remove panel screws Slide out trim strips Lift panels up and out
Comments to this Manuals