Ersatzteilinformation
Sparepart information
58300000137031_ABZ_INT_D
2/17/2009
Page 1/5
647474, 647475, 647476, 647477, 647478
EN
Replacing electronic dishwasher controls
Please follow these instructions for installing the following electronic dishwasher controls:
647474 647475 647476 647477 647478
Instructions:
1. Turn off power to / unplug dishwasher, then remove (6) upper inner door screws to remove fascia panel
from door. Bend fascia panel console (frame) tabs to remove existing (old) control from console.
TIP: If fascia panel doesn’t
come off easily, remove all
inner door screws to remove
outer door.
2. Note wire harness connections, then disconnect harnesses. Replacement controls have yellow labels,
green pc boards and surface mount LED’s. Old controls had white labels. Most old controls had green
pc boards and surface mount LED’s, but some had beige pc boards and red LED’s.
3. Connect harnesses to replacement control, then reconnect / plug in and turn dishwasher on for recoding.
Controls must be recoded
before fascia panels are installed since the fascia panel covers the S5 button
necessary for recoding (see page 2 for coding instructions).
4. Check dishwasher operation, including testing each wash cycle and heater / drain pump operation.
5. When repair has been completed, cut off bottom right corner of serial label to
show repair has been made.
Cut off bottom right cornerCut off bottom right corner
6. Mandatory Requirement: Please complete the appropriate form, US or Cana-
dian, and mail it in. Postage is pre-paid.
7. Destroy the old control.
8.
If you have any technical questions, please call 1-800-444-9091.
Copyright by BSH Bosch-und Siemens Hausgeräte GmbH • Customer Service
Comments to this Manuals