
/
/
2nd Edition/Revision 3 (3/4/04)
/
9
Part # 2
Part # 2
--
--
Circulation Pump & Impeller (3)
Circulation Pump & Impeller (3)
CAUTION: Its not recommended to
turn dishwashers upside-down for tank
access. When dishwashers are turned
upside-down, water can flow into the
diaphragm of the water fill assembly
and cause water to not fill properly.
To raise right side of tank for circulation pump access:
# Remove one T-20 Torx screw from both rear corners holding tank to base (1) -- removing screw
from both sides allows tank to be blocked upward.
# Remove right toe kick bracket by removing T-20 Torx screw (2).
# Remove T-20 Torx screws from front right bottom corner holding tank to base (3).
# Remove right hinge cover (4a), release right door tension cord from hinge (4b) & remove ground
wire (4c).
# Raise and block up tank as shown with strut onto base (5a), sliding a piece of wood or other solid
material between the tank and base to keep tank from falling back onto base (5b).
1
3
2
Screw
4a 4b
4c 5a 5b
Comments to this Manuals