Siemens TE803509DE User Manual download pdf (Page 50)

46

en

Empty drip tray

Replace drip tray

● Empty the drip tray 23 and reinsert it.

The appliance is ready for use again.

calc‘nClean

Duration: approx. 36 minutes.

calc‘nClean combines the separate

functions of descaling and cleaning.

If both programmes are due to be run

soon, the espresso machine automatically

suggests this service programme.

Cleaning and service

Short rinse

milk system

calc‘nClean



start

The start button 8 ashes while the differ-

ent calc‘nClean processes are running. The

gures on the top right indicate the progress

of the programme.

Important: If there is a water lter in the

water tank 11, it needs to be removed

before the service programme is run.

● Press the à button 3.

calc‘nClean



start

● Press the start button 8; the display 5 will

guide you through the programme.

Empty drip tray

Replace drip tray

● Empty the drip tray 23 and reinsert it.

● Swivel the coffee outlet 9 to the right until

it clicks into place.

Place 1 l container

Place suction pipe in container



start

● Place a container with a capacity of at

least 1 l under the milk frother 10.

● Place the end of the suction pipe 10d in

the container.

● Press the start button 8. The appliance

rinses twice.

Cleaning

Open powder compartment

● Open the powder compartment 18.

Insert Siemens cleaning tablet

and close drawer

● Drop a Siemens cleaning tablet in the

drawer 18 and close.

Remove filter



start

Info: If the water lter is activated, the dis-

play will prompt you to remove the lter,

then press the start button 8 again.

Add 0.5 l water and descaler



start

● Pour lukewarm water into the empty

water tank 11 up to the “0.5 l” mark and

then dissolve two Siemens descaling

tablets in it.

● Press the start button 8. The descaling

programme now runs for about

20 minutes.

Descaling

Not enough descaling fluid.

Refill fluid



start

Info: If there is not enough descaling solu-

tion in the water tank 11, the corresponding

prompt is displayed. Pour in descaling solu-

tion and press the start button 8 again.

Clean and refill water tank



start

● Rinse the water tank 11 and rell it with

fresh water up to the “max” mark.

TE803_806_1DE.indb 46 08.05.2013 12:07:57

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 111 112

Comments to this Manuals

No comments