Siemens Model 240 Service Manual download pdf (Page 16)

100

101

Parameters

List of Parameters

1-16

SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011

1.2 List of Parameters

Product: SINAMICS G120 CU240, Version: 4402100, Language: eng

Objects: CU240B-2, CU240B-2 DP, CU240E-2, CU240E-2 DP, CU240E-2 DP F, CU240E-2 F

Description: Operating display for the drive.

Value: 0: Operation - everything enabled

10: Operation - set "enable setpoint" = "1" (p1142)

12: Operation - RFG frozen, set "RFG start" = "1" (p1141)

13: Operation - set "enable RFG" = "1" (p1140)

14: Operation - MotID, excit. running

16: Operation - withdraw braking with OFF1 using "ON/OFF1" = "1"

17: Operation - braking with OFF3 can only be interrupted with OFF2

18: Operation - brake on fault, remove fault, acknowledge

19: Operation - DC braking active (p1230, p1231)

21: Ready for operation - set "Operation enable" = "1" (p0852)

22: Ready for operation - de-magnetizing running (p0347)

31: Ready for switching on - set "ON/OFF1" = "0/1" (p0840)

35: Switching on inhibited - carry out first commissioning (p0010)

41: Switching on inhibited - set "ON/OFF1" = "0" (p0840)

42: Switching on inhibited - set "OC/OFF2" = "1" (p0844, p0845)

43: Switching on inhibited - set "OC/OFF3" = "1" (p0848, p0849)

45: Switching on inhibited - rectify fault, acknowledge fault, STO

46: Switching on inhibited - exit comm mode (p0010)

70: Initialization

200: Wait for booting/partial booting

Dependency: Refer to: r0046

Notice: For several missing enable signals, the corresponding value with the highest number is displayed.

Note: OC: Operating condition

RFG: Ramp-function generator

COMM: Commissioning

MotID: Motor data identification

Description: Sets the access level to read and write parameters.

Value: 3: Expert

4: Service

Note: Access level 3 (experts):

Expert know-how is required for these parameters (e.g. BICO parameterization).

Access level 4 (service):

For these parameters, it is necessary that authorized service personnel enter the appropriate password (p3950).

r0002 Drive operating display / Drv op_display

Access level: 2 Calculated: - Data type: Integer16

Can be changed: - Scaling: - Data set: -

Units group: - Unit selection: -

Min Max Factory setting

0 200 -

p0003 Access level / Acc_level

Access level: 1 Calculated: - Data type: Integer16

Can be changed: C, U, T Scaling: - Data set: -

Units group: - Unit selection: -

Min Max Factory setting

3 4 3

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 749 750

Siemens Model 240 Service Manual Page 16

Comments to this Manuals

Siemens Model 240 Service Manual Page 16

Comments to this Manuals

Related products and manuals for Telephones Siemens Model 240