Siemens Model 240 Installation Manual download pdf (Page 45)

Technical data

6.2 Electrical Data

Power Modules PM240

Hardware Installation Manual, 2006-04-04, A5E00807525B AA

6-7

Braking resistor data

Table 6-5 Data for braking resistors

DC_max

for Frame size Rated Voltage V

DC_max

A B C D E F

400 V 820 V … 840

2.15 A

(390 Ω)

5.25 A

(160 Ω)

15 A

(56 Ω)

30.4 A

(27 Ω)

54.7 A

(15 Ω)

100.0 A

(8.2 Ω)

Power Module PM240 Specifications

Caution

High Overload (HO) and Light Overload (LO) input currents

The input current at the rated operating point - applies for the short-circuit voltage of the line

supply V

= 1 % referred to the rated SINAMICS G120 Power Module power and a rated line

supply voltage of 400 V without line a commutating reactor. If a line commutating reactor is

used, the specified values are reduced by between 70 % and 80 %.

Notice

UL certified Fuses must be used

In order that the system is in compliance with UL, UL certified fuses, circiut-breaker or self

protected combination motorcontroller must be used.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 85 86

No comments

Siemens Model 240 Installation Manual Page 45