Siemens Gigaset SL75 WLAN Specifications download pdf (Page 18)

17

Connecting the handset with the network

Gigaset SL75 WLAN / en / A31008-M700-B112-1-7619 / starting.fm / 24.4.06

Version05.08.2005

u If a "hidden" SSID is configured for the

access point, deactivate this setting to

simplify handset login.

u If the access point uses authentication

by certificate for WLAN access

(page 9), you must deactivate authen-

tication at the access point. Only once

the handset is logged in can you load

the certificate onto the handset and

reactivate authentication.

Compiling the necessary access

data

To access the WLAN:

u Network name (SSID),

u Data for authentication and the

encryption procedure used for a

"secure" WLAN (page 62),

u A free IP address from the WLAN's

address block, if the handset is to be

assigned a fixed IP address (i.e. DHCP is

not used page 10).

To access the SIP service:

u Your SIP account, i.e. your user name

and password.

For some SIP providers you must also

specify an authentication name on regis-

tration.

You can obtain this access data from your

SIP provider.

Creating an access profile

The procedure below requires that the

handset is not yet registered in a WLAN

and that no access profile has been saved.

¤ Press the end call key a to activate

the handset.

¤ Press the left-hand display key §Scan§.

The handset searches for accessible access

points.

A list is displayed with the SSIDs of the

access points found (provided the access

point has switched the SSID to visible).

You can scroll through the list with the

control key (press down or up).

¤ Select the SSID for your access point

and press

§OK§.

You will see the following display:

1 Default name of the profile

Entering a profile name (optional)

~ Enter any profile name (max.

32 characters, umlauts must

not be used).

Note:

You can find your handset's MAC address in the

battery compartment under the battery, or it

can be called up via

v ¢ Ð ¢ Status.

Note:

Your SIP provider may use different terminol-

ogy. Please refer to the Siemens website

www.siemens.com/gigasetcustomercare

for a

list of alternative terms used.

Note:

If the SSID for your access point is "hidden",

select <Manual Config.> and enter the SSID.

Note:

Select a descriptive profile name from which

you can recognise the WLAN and SIP settings

for which the profile is valid, e.g.

"Anna_Office". This will make it easier to select

a profile later.

Profile 1

Profile name:

Profile 1 ¼

WLAN:

MyWLAN

Wx §Save

1

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 149 150

Comments to this Manuals

No comments