Siemens Gigaset SL100 colour Specifications download pdf (Page 76)

Connecting the base station to a PABX

Gigaset SL100 colour / IM_eng / A31008-M1571-R221-2-7619 / pabx.fm / 04.11.05

◆ If you use the telephone number from the directory when sending an SMS, you have

to delete the access code.

◆ You can delete an access code using X. To insert a pause, press ,

s Insert Pause or , s Insert Recall .

Setting pauses

Changing the pause after line seizure

You can set the length of the pause that is inserted between pressing the top half of the

c key and the transmission of the telephone number (the factory setting is 3 seconds).

Change pause after Recall key

You can change the length of the pause if your PABX requires this (refer to the operating

instructions for your PABX; the factory setting is 800 ms).

Changing the dialling pause (pause after access code)

Precondition: You have stored an access code (page 74). Factory setting: 3 seconds.

Switching temporarily to tone dialling (DTMF)

If your PABX still operates with dial pulsing (DP) but tone dialling (DTMF) is required for

a particular call (e.g. to check your network mailbox), you have to switch to tone dialling

during the call.

Precondition: A call is in progress.

OK à OK

Open the menu.

N O 1 L

Press keys.

~ Enter a number for the length of the pause

(1 =1sec.; 2 = 3 sec.; 3 =7sec. and confirm.

Open the menu.

N O 1 2

Press keys.

~ Enter a number for the length of the pause (1 =

800 ms; 2 = 1600 ms; 3 = 3200 ms) and confirm.

Open the menu.

N O 1 1

Press keys.

~ Enter a number for the length of the pause (1 =

1 sec.; 2 = 2 sec.; 3 = 3 sec.; 4 = 6 sec.) and confirm.

Open the menu.

s Tone Dialing

Tone dialling is now activated for this call.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 92 93

No comments

Siemens Gigaset SL100 colour Specifications Page 76