8.6 DMP compact module 1O analog (6FC5111-0CA05-0AA0)
8-109
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
8.6 DMP compact module 1O analog (6FC5111-0CA05-0AA0)
The DMP compact module 1O analog is an encapsulated module. It can be
plugged into a slot of the NCU terminal block as a plug-in module. (Maximum
4 modules per terminal block)
24 V DC
1, 4 ... Shield
2 ... Analog output Out+
X1
Status
LEDs
Fixing
screw
Labeling
strips
POWER
SUPPLY
OK
ANALOG
OUT
Connecting terminals
X3
X2
0 V
2.5
1.5
1234
P1 P2 M1 M2
Terminal:
3 ... Analog output Out–
Fig. 8-8 Front view and side view of a DMP compact module 1A analog
A 30-pole connector X1 for connection to the NCU terminal block.
4-way terminal X3 (Phoenix, Type MC1.5/4-ST-3.81, order no. for X3:
1828126) for connecting the power supply for the analog part and X2
(Phoenix, Type MSTB2.5/4-ST-5.08 GREY, order no. for X2: 18 40 942) for
connecting the analog output.
The terminals are pluggable and can be mechanically coded by the
customer.
The pure conversion time is a max. of 10 µs. Because the analog signal is
smoothed by an RC element, its time constant determines the total conversion
time:
Product version A: 100 µs
As of product version B: 330 µs
1 LED as a status display for the power supply.
LED lit: internal power supply OK
Interfaces
Conversion time
Display elements
8 DMP Com
act Modules
Comments to this Manuals