Siemens Server User Manual download pdf (Page 16)

Setting the IP address of the ChemWeb Server

A fixed IP address and network

mask must always be assigned.

Other settings should not be

changed.

Confirm and store by clicking

“OK” twice.

With some Windows

configurations, a restart may now

be necessary.

Special features of the direct network connection with Windows 95 / 98 / ME

With these Windows versions, a network connection is set up automatically if a network board is

identified in the laptop computer/PC. It is, however, possible that the wrong network protocol is

installed in the network settings! The “TCP/IP” protocol must be installed in the network settings!

All other protocols and network components can be deleted except for the network board.

Switched connection via modem

To set up a connection to the ChemWeb Server via the integrated modem, the following data are

required:

- modem type (analog / ISDN)

- telephone number of the ChemWeb Server

- PPP-IP address

- access code (login / password)

Take into account that, with one modem, data connections can only be established to certain other

types of modems:

Analog modem ISDN modem

Analog modem 

ISDN modem



As an example, the setup of a switched connection using a WindowsXP system is shown below. With

other Windows versions, the procedure is similar (possibly the remote data transmission network must

be reinstalled). See your IT Department if needed. The modem or the ISDN card must have already

been installed correctly. To set up the connection, the menu item “Create a new connection” in the left

window under “Control Panel” ==> “Network and Internet Connections” ==> “Network

Connections” must be selected.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

No comments

Siemens Server User Manual Page 16