Siemens Server User Manual download pdf (Page 30)

Server Setup

Bus scan

Under this menu item all bus users connected are located automatically, and the corresponding results

are displayed. Click “Start Scan” to initiate the “Bus scan”.

After the message “Scanning done” appears, the ChemWeb Server reinitializes all aspects of the

traced devices. This may take up to 1 minute.

This window also states the software version and the software date of the ChemWeb Server below the

scan results.

ISP configuration

Under this menu item, the ChemWeb Server is supplied with the data from your provider for access to

Internet. Type the data you received from your provider in the corresponding boxes and confirm the

entry by clicking “Send”.

Parameter

This entry box contains the dial data for seizing an exchange line in the case of telephone systems

(0, etc., refer to the operating instructions of the telephone system). Generally, a ring back tone is

not waited for!

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

No comments

Siemens Server User Manual Page 30