Siemens 5890 User's Guide download pdf (Page 88)

SIEMENS 5890 DSL Router

User’s Guide

Chapter 6 Security Setup

IKE/IPSec Configuration

SIEMENS 82

IKE Peers Definition

IKE peers are those devices known to your internal modem as capable of participating in IKE connections. To

define a new IKE Peer:

1. Click Create next to IKE Peers from the Advanced IKE/IPSec Setup page. This displays the IKE Peer

Definition page.

2. In IKE Peer Name, enter a logical name for an IKE Peer. This name is of no importance to the remote IKE

peer. Choose a name that is meaningful to you.

3. In Pre-shared Secret, enter a case-sensitive character string used for authentication. This secret can be

up to 256 characters, with no spaces or non-printable characters. The pre-shared secret must be mutually

agreed upon by both parties to the IKE connection.

4. In Peer Gateway IP Address, enter the IP address of the gateway at the remote end of the IKE

connection. If the remote IKE peer does not have a fixed or permanent IP address, enter “0.0.0.0” to use

Aggressive Mode in Phase 1 negotiations. (Your system supports two Phase 1 IKE modes: Main and

Aggressive. Use Main Mode when both the source and destination IP addresses are known and use

Aggressive Mode when either the source or destination IP addresses could change.)

5. Click Apply.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 101 102

No comments

Siemens 5890 User's Guide Page 88