Siemens 5890 User's Guide download pdf (Page 86)

SIEMENS 5890 DSL Router

User’s Guide

Chapter 6 Security Setup

IKE/IPSec Configuration

SIEMENS 80

Easy IKE/IPSec Setup

Internet Key Exchange (IKE) is a means of dynamically creating secure IP (IPSec) connections, which uses

encryption and authentication to virtual private networks over an insecure network.

The Easy IKE/IPSec Setup form is used to create a default IKE configuration. To perform Easy IKE/IPSec

setup:

1. Click Easy IKE/IPSec Setup from the left navigation pane of the IKE/IPSec Information page. This displays

the Easy IKE/IPSec Setup page.

2. In IKE Peer Name, enter a logical name for an IKE Peer. This name is of no importance to the remote IKE

peer. Choose a name that is meaningful to you.

3. In Pre-shared Secret, enter a case-sensitive character string used for authentication. This secret can be

up to 256 characters, with no spaces or non-printable characters. The pre-shared secret must be mutually

agreed upon by both parties to the IKE connection.

4. In Peer Gateway IP Address, enter the IP address of the gateway at the remote end of the IKE

connection.

5. In Destination IP Address, enter the IP address of the remote private network that your system will

authenticate using this IKE policy.

6. In Destination Subnet Mask, enter the destination subnet mask of the remote private network that your

system will authenticate using this IKE policy.

7. Click Apply.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 101 102

No comments

Siemens 5890 User's Guide Page 86