Siemens 5890 User's Guide download pdf (Page 52)

SIEMENS 5890 DSL Router

User’s Guide

Chapter 5 Advanced Setup

DHCP

SIEMENS 46

3. Click Apply.

4. When a PC boots and asks for an IP address, the DHCP server assigns it an address from a pool of

addresses assigned to the subnetwork where the client request originated. To specify the start and ending

address range of the IP address pool, enter the starting address in First IP Address and the ending

address in Last IP Address.

5. Click Apply.

Note that a list of network clients that are currently leasing their IP addresses from the pool are shown in

Current DHCP Leases List: From left to right, the following information is presented for each client:

• Client IP: The leased IP address assigned to the specific client.

• State: Whether the IP address is enabled or disabled.

• Host Name: Name of the host leasing the specific IP address.

• Expires (mm/dd/yy): Date when the IP address lease will expire. At that time (if not before), the leased IP

address will be freed for re-assignment, and the network client will need to request a new IP address from

the router.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 101 102

No comments

Siemens 5890 User's Guide Page 52