Siemens OpenStage 10 T User's Guide download pdf (Page 40)

Step by Step

Enhanced phone functions

Answering calls from the entrance telephone

and opening the door

If an entrance telephone has been programmed, you

can use your telephone to speak to someone at the en-

trance telephone and to activate a door opener.

If you have the proper authorization (contact your ser-

vice personnel), you can activate the door opener, en-

abling visitors to open the door themselves by entering

a 5-digit code (using a DTMF transmitter or the keypad

installed).

Speaking to visitors via the entrance telephone

Prerequisite: Your telephone rings.

^ Lift the handset within thirty seconds. You are connect-

ed to the entrance telephone immediately.

^ Lift the handset after more than thirty seconds.

j Dial the entrance telephone number.

Opening the door from your telephone during a call

from the entrance telephone

Confirm.

Opening the door from your telephone without

calling the entrance telephone

N Press the key shown.

Select and confirm the option shown.

j Dial the entrance telephone number.

Opening the door with a code (at the door)

j After ringing the bell, enter the five-digit code (using the

keypad or a DTMF transmitter). Depending on how the

door opener has been programmed, a doorbell call sig-

nal may or may not be forwarded.

Open door?

*61=Open door?

Special features must be taken into consider-

ation if your telephone operates with

HiPath 5000 (system networking via PC net-

work) Æ page 112!

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 134 135

No comments

Siemens OpenStage 10 T User's Guide Page 40