Siemens OpenStage 10 T User's Guide Page 94

  • Download
  • Add to my manuals
  • Print
  • Page
    / 135
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 93
Step by Step
Making calls in the team/executive/secretary configuration
94
Line seizure
Line seizure must be configured (consult your service
personnel). If automatic line seizure is configured, a
trunk is automatically assigned when you lift the hand-
set or press the trunk key.
Trunk keys
The programmable keys on multi-line phones function
as line keys. Every sensor key programmed as a "Trunk
key" (key label: Transfer Trk) corresponds to a trunk with
the result that you can configure up to 8 trunks in
OpenStage 30 T .
As a team member, you can independently program the
following functions on keys Æ page 63:
Direct station select
Join/leave group
(not available on executive phone in an executive/
secretary team)
Ring Transfer: On/Off
(only in an executive/secretary team)
You can also program a sensor key with the function
"Forward Line" (call forwarding) for each line.
LED displays on trunk keys
LED Explanation
S
Off The line is in idle mode.
T
Flashing
1
[1] In this manual, flashing keys are identified by this icon, regardless
of the flashing interval. The flashing interval represents different
statuses, which are described in detail in the corresponding sec-
tions of the manual.
Incoming call on the line.
Hold reminder is activated.
The line is on "Hold".
R
On The line is busy.
Page view 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 134 135

Comments to this Manuals

No comments