Siemens C10 User Manual download pdf (Page 9)

Setting up SSID, Security and QOS

1. Click the VNS Configuration button.

2. Click the Topology tab.

3. Assign a subnet for clients for a specific SSID.

4. Under DHCP Settings:

a. Enter the appropriate address for the Gateway

b. For Mask enter 255.255.255.0.

c. The address range should default to 192.168.121.2 – 192.168.121.254.

Change this if you want a limited range of addresses assigned to this subnet.

d. No DNS Servers or WINS is required.

5. Set the Timeout Idle: pre and post to 2.

6. Under Next Hop Routing, set the OSPF Route Cost to 50000.

7. Enter an SSID name.

8. Under Wireless APs, select the b/g check box for each AP.

9. Click the Save button.

PN: 72-9961-00-B.doc Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

No comments

Siemens C10 User Manual Page 9