Siemens C10 User Manual download pdf (Page 3)

Known Limitations

1. Beacons are sent from the AP inconsistently; therefore you may see decreased

battery life on the handsets.

2. A hex-key is not supported with both WPA-PSK and WPA2-PSK. You must use a

passphrase for each.

3. Because the Controller configures a virtual subnet, broadcast data cannot be sent to

the handsets.

Installing Software & Configuration

1. If software upgrades are required, contact Siemens Customer Support for the latest

version of software and instructions.

2. The current version of software installed can be found by opening a telnet session of

the AP and typing the command

version, or by looking at the configuration GUI

under

Wireless APs and selecting the general tab for the AP in the field s/w version.

3. If you encounter difficulties or have questions regarding the configuration process,

please contact your Siemens representative or visit the web site

http://enterprise.usa.siemens.com/products/solutions/hipathwireless.html

Initial Setup

1. The following instructions are for configuring a wireless controller and a number of

access points with no prior configuration.

2. All of the initial setup is done via a web interface. Connect a ‘Cross-Over’ Ethernet

cable directly from the Management Port of the controller to a PC’s Ethernet port.

3. Log onto the controller by opening a web browser and connect to

https://192.168.10.1:5825/. The default username is admin; the default password is

abc123.

4. Do this step only if it is necessary to reset the controller back to its factory default

configuration:

a. Click the Wireless Controller button to open the Wireless Controller

Configuration

screen.

b. In the navigation pane, click System Maintenance.

c. Click the Reset database to factory default and reboot button.

d. Click the Apply button.

This will reset the database and cause the controller to reboot. It will take three

to four minutes before the controller is finished.

PN: 72-9961-00-B.doc Page 3

1 2 3 4 5 6 7 8 ... 17 18

No comments

Siemens C10 User Manual Page 3