Siemens 2015 User Manual download pdf (Page 70)

Operation with several base stations

Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619

kap15.fm5

29.10.99

Operation with several base stations

You can “log on” and operate your handset at up to 4 Gi-

gaset base stations of the Gigaset family (from Gigaset

1010 and Gigaset 2010 and higher).

This has the following advantages:

● You can operate the same handset at geographically

dispersed base stations (e.g. at home and in the

office).

● In large premises, a number of base stations can be

positioned to give you much wider coverage with the

same handset.

Activating/deactivating base station number display on handset

You can program your handset to display the base

station with which the unit has radio contact.

Note the following important points when oper-

ating a handset at several base stations:

● Calls in progress are interrupted or cleared

down when you switch from the radio

range of one base station to the radio range

of another base station.

● Internal calls can only be made within the

radio range of a base station - not to hand-

sets which are within radio range of a differ-

ent base station.

● If your handset is switched on and you are

out of range of all base stations for

several minutes, it can take up to 20 min-

utes to “relocate” a base station. In such

cases you can speed up the process of

relocation by switching the handset

on and off (➔ page 14).

B 3 6

Start the procedure. The current setting is displayed:

361 = activated, 360 = deactivated.

Activate the base station number display.

Deactivate the base station number display (default).

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 87 88

No comments

Siemens 2015 User Manual Page 70