Siemens 2015 User Manual download pdf (Page 66)

Logging on additional handsets at the base station

Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619

kap13.fm5

29.10.99

Logging on additional handsets at the base station

You can operate the following at a Gigaset 2015plus

base station: up to six Gigaset 1000S/2000S or Gigaset

1000C/2000C/2000C pocket/2000T as well as the Gigas-

et 1000TAE cordless socket.

The Gigaset 2000S handset has already been logged on

with the internal telephone number 1 at the base station

with station number 1.

Each additional handset must be “logged on” at the base

station.

Logging on Gigaset 2000S/1000S handset at the base station

Prepare the base station

Log on handset

If you wish to operate your handset at several

(up to 4) base stations (➔ page 61), you must re-

peat the following procedure at each of these

base stations.

The handset must be switched off

(➔ page 15)

Keep pressing the green paging key at the base station

until you hear the log-on (registration) tone (this takes

roughly 10 seconds).

1 or 2,3,4

Handset must be switched off. Within one minute: en-

ter and hold down station number of the base station (1)

on the handset.

Press this key also, until the display appears on the

handset. The handset is switched on.

Examples: logging on

● Logging onto the 1st base station

hold down 1, and press h.

Station number

● Logging onto the 2nd base station

hold down 2, and press h.

o #

Enter the 4-digit system code (default “0000”) (➔ page

19) and then enter #. All unassigned internal numbers

are shown in the display of the handset after a brief delay:

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 87 88

No comments

Siemens 2015 User Manual Page 66