Siemens 2015 User Manual download pdf (Page 17)

Outgoing calls

Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619

kap04.fm5

29.10.99

Suppressing code numbers for redial

When you dial a telephone number it is incorporated into

the redial list. Both the number dialled after this number,

e.g. an extension number and a subsequent secret “serv-

ice number” is added to the telephone numbers in the re-

dial list. To prevent the incorporation of secret numbers,

activate “temporary tone dialling” – e.g. after the exten-

sion number (➔ page53) even if your telephone is set to

tone dialling.

Suppressing display of telephone numbers on called party’s unit

To suppress display of your telephone number on the

called party’s unit, use a sequence of telephone services

(CLIR). To do this, your telephone must be set to tone di-

alling (DTMF).

Dialling with speed dialling numbers

If you have programmed speed dialling numbers

(➔ page32), you can dial the associated number by enter-

ing a speed dialling number.

Press the off-hook key.

*31#

Enter Service sequence for telephone number suppres-

sion, wait for dial tone and then

dial the telephone number.

A prerequisite here is that the network provider

must support this function.

Seize the dialup line. You hear dial tone.

Press the speed dialling key and enter the speed dialling

code (0 to 9) for the required number.

If you are not sure of the speed dialling code for the

required number: keep pressing the speed dialling key

until both numbers appear on the display.

Enter the speed dialling code displayed (4 in this

example).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 87 88

No comments

Siemens 2015 User Manual Page 17