Siemens OpenStage 10 T Service Manual download pdf (Page 44)

Examples and HowTos

beispiele.fm

optiPoint Compatible Mode (V2R0)

A31003-S2000-M101-4-76A9, 2010-02-23

4-8 HiPath 3000/5000, HiPath 4000 - OpenStage 10/15/20/40/60/80 T, Administration Manual

4.3.2 Switching Procedure for OpenStage 10

The operating mode of an OpenStage 10 phone is changed via the 3 function keys.

1. Initially, all 3 LEDs of the function keys are off. Press the rightmost function key for at least

5 seconds.

2. The current active phone operating mode will be indicated by the LED on one of the other

two function keys. When OpenStage mode is active, the middle LED glows, whereas in

optiPoint mode, the leftmost LED glows.

OpenStage Mode:

optiPoint Mode:

3. To toggle between modes, press either the leftmost or the middle function key, depending

on which mode is active.

From OpenStage mode to optiPoint mode:

From optiPoint mode to OpenStage mode:

4. After a timeout of 2 seconds, the phone restarts and comes up in the new operating mode.

SSS

SRS

RSS

SRS

RSS

1 ... 43 44 45 ... 54

No comments

Siemens OpenStage 10 T Service Manual Page 44