Siemens Gigaset DX800A all in one Specifications download pdf (Page 137)

135

Configuring the system settings

Gigaset DX800A all in one / GBR / A31008-N3100-L101-2-7619 / settings.fm / 07.04.11

Version 4, 16.09.2005

Setting the base's IP address

in LAN

Prerequisite: Your base is connected to a

router or a PC (

¢ page 16).

An IP address is required in order for the LAN

to "recognise" your base.

The IP address can be assigned to the base

automatically (by the router) or manually.

u If done dynamically, the router's DHCP

server automatically assigns an IP

address to the base. The base's IP address

can be changed according to router set-

tings.

u If done manually/statically, you assign a

static IP address to the base. This may be

necessary depending on your network

configuration (e.g., if your base is con-

nected directly to a PC).

You can also make local network settings via

the Web configurator.

v

¢ Ï Settings ¢ System

¢ Local Network

~ Enter the current system PIN if

necessary and press

§OK§.

¤ You can enter data in the following fields:

IP Address Type

Select Static or Dynamic.

For IP Address Type Dynamic:

The following fields show the current set-

tings that the phone obtained from the

router. These settings cannot be

changed.

For IP Address Type Static:

You must manually define the IP address

and the subnet mask for the base in the

following fields, as well as the standard

gateway and DNS server.

For IP Address Type Static:

IP Address

Enter the IP address that is to be assigned

to the base (overwriting the current set-

tings).

192.168.2.1 is the default setting.

For information on the IP address,

see the glossary on page 174.

Subnet Mask

Enter the subnet mask to be assigned to

the base (overwriting the current set-

tings).

The default setting is 255.255.255.0

For information on the subnet mask,

see the glossary on page 178.

DNS Server

Enter the IP address for the preferred DNS

server. The DNS server (Domain Name

System,

¢ page 171) converts the sym-

bolic name of a server (DNS name) into

the public IP address for the server when

the connection is made.

You can specify your router's IP address

here. The router forwards base address

requests to its DNS server.

192.168.2.1 is the default setting.

Default Gateway

Enter the IP address for the standard

gateway (

¢ page 173) through which

the local network is connected to the

Internet. This is generally the local (pri-

vate) IP address for your router (e.g.,

192.168.2.1). Your base requires this infor-

mation to access the Internet.

192.168.2.1 is the default setting.

¤ Press §Save§ to save the settings.

Please note

To assign the IP address dynamically, the

DHCP server on the router must be acti-

vated. Please also read the user guide for

your router.

Please note

You can also make the settings for the

local network via the Web configurator

(

¢ operating instructions for the Web

configurator on the enclosed CD).

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 193 194

Comments to this Manuals

No comments