Siemens TE717209RW User Manual download pdf (Page 28)

24

en

Clean and refill water tank



start

● Rinse the water tank 11 and rell it with

fresh water up to the “max” mark.

● Press the start button 8. The descaling pro-

gramme now runs for about 1 minute more,

followed by the cleaning programme for

about 7

minutes, and rinses the appliance.

Descaling

Cleaning

Empty drip tray

Replace drip tray

● Empty the drip tray 23 and reinsert it.

Replace the lter if one is being used. The

appliance has completed descaling and

cleaning and is ready for use again.

Important: Wipe down the appliance using a

soft, damp cloth to immediately remove any

descaler residue. Such residue can cause

corrosion. New sponge cloths may contain

salts. Salts can cause rust lm on stainless

steel and must therefore be washed out

thoroughly before use.

Thoroughly clean the suction pipe 10d of

the milk frother.

Note: If one of the service programmes is

interrupted, e. g. by a power outage, pro-

ceed as follows:

● Rinse the water tank 11 and rell it with

fresh

water up to the “max” mark.

● Press the start button 8. The cleaning

programme now runs for about 3 minutes,

and rinses the appliance.

Cleaning

Empty drip tray

Replace drip tray

● Empty the drip tray 23 and reinsert it.

The appliance is ready for use again.

Tips on energy saving

● The display has a dimming function that

switches on automatically when the

appliance is not in use. The display is

illuminated dimly. Press any button or

the rotary knob to brighten the display

illumination again.

● If the appliance is not being used, switch

it off at the power on/off switch 1 O / I on

the front.

● If possible, do not interrupt coffee or milk

froth dispensing. Stopping a process

prematurely results in higher energy

consumption and the drip tray lls up

more quickly.

● Descale the appliance regularly to avoid

a build-up of limescale. Limescale residue

results in higher energy consumption.

Frost protection

¡ To avoid damage caused by frost

during transport and storage, the

appliance must be completely

emptied rst.

See “Menu settings – Transport. lock.”

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 171 172

Comments to this Manuals

No comments