Siemens TE717209RW User Manual download pdf (Page 21)

17

en

Preparing milk froth and

warm milk

¡ Risk of burns!

The milk frother 10 gets very hot. After use,

allow to cool down rst before touching.

The appliance must be ready for use.

● Place the suction pipe 10d of the milk

frother 10 deep in the milk container 26.

● Place the pre-warmed cup or glass under

the outlet of the milk frother 10.

● Select the required setting Milk froth

È

or Warmmilk

É

by turning the rotary

knob 6.

● Press the start button 8.

Milk froth or warm milk ows from the outlet

of the milk frother 10.

Press the start button 8 again to cut the

process short.

Info: When preparing warm milk, you may

hear a whistling sound. This is caused by

the milk frother 10 for technical reasons.

Tip: For optimal milk froth quality, use cold

milk with a fat content of at least 1.5 % if

possible.

Important: Dried milk residue is difcult

to remove, so the milk frother 10 must be

cleaned with lukewarm water immediately

after use (see “Cleaning the milk system”).

Dispensing hot water

¡ Risk of burns!

The milk frother 10 gets very hot. After use,

allow to cool down rst before touching.

The milk frother must be cleaned before

drawing hot water.

The appliance must be ready for use.

● Place the pre-warmed cup or glass under

the outlet of the milk frother 10.

● Select the required setting for Hot

water

Ê

by turning the rotary knob 6.

● Press the start button 8.

Please remove suction hose



start

● Remove the milk suction hose 10c and

press the start button 8.

Hot water runs out of the milk frother

outlet 10.

Press the start button 8 again to cut the

process short.

Note: It is possible to set the temperature of

the hot water (see “Menu settings”).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 171 172

Comments to this Manuals

No comments