Siemens ADSL 500 User Manual download pdf (Page 6)

SANTIS ADSL 50/500 User Manual

Routing Features

 UPnP IGD (Internet Gateway Device) with NAT traversal capability support

 NAT (Network Address Translation) / PAT (Port Address Translation) let multiple users on the LAN to access

the internet for the cost of only one IP address and enjoy various multimedia applications.

 ALGs (Application Level Gateways): such as NetMeeting, FTP, Quick Time, mIRC, Real Player, CuSeeMe, etc.

 Multiple Virtual Servers (e.g., Web, FTP, Mail servers) can be setup on user’s local network.

 Static routes, RFC1058 RIPv1, RFC1723 RIPv2.

 DNS Relay and DNS Server

 ARP Proxy

Security Features

 PAP (RFC1334), CHAP (RFC1994) for PPP session

 Firewall support IP packets filtering based on IP address/Port number/Protocol type and TCP code field flags

 Intrusion Detection provides protection from a number of attacks (such as SYN/FIN/RST Flood, Smurf,

WinNuke, Echo Scan, Xmas Tree Scan, etc)

 WEP (Wired Equivalent Privacy) encryption uses RC4 with 64/128 bit key length

Configuration and Management

 User-friendly embedded web configuration interface with password protection

 Remote management accesses control

 Telnet session for local or remote management

 HTTP firmware upgrades via web browser GUI directly

 Distribute IP addresses to end users via DHCP server provided by ADSL router

 SNMPv1/v2c agent with MIB-II, PPP MIB, ADSL Line MIB.

System Requirements

For using this, you have to make sure you have the following that installed on the clients:

For Wireless Clients

 Operating System must be Windows98/2000/NT/ME/XP

 Wireless card installed

 Wireless card driver

For Ethernet Clients

 Operating System must be Windows98/2000/NT/ME/XP

 10/100 Base-T NIC

 10/100 Base-T(UTP) network cable

 AHub

For USB Clients

 Operating System must be Windows98/2000/NT/ME/XP

 USB cable

1 2 3 4 5 6 7 8 9 10 11 ... 77 78

No comments

Siemens ADSL 500 User Manual Page 6