Siemens ADSL 500 User Manual download pdf (Page 58)

SANTIS ADSL 50/500 User Manual

IP Address

LAN Configuration allows you to define the public/private IP address over the LAN interface.

Primary IP Address: Private IP address is used for the purpose of system management. When it is assigned, PC on

the LAN is able to use the specified address to access this ADSL Router through Ethernet.

By default, the IP address and subnet mask is 192.168.1.1 and 255.255.255.0 respectively. This

will give you an available range of IP addresses from 192.168.1.2 to 192.168.1.254 that can be

assignedtoPCsontheLAN.

Secondary IPAddress:If you applied for multiple IP address from your ISP, you will have a range of IP address for

the ADSL Router and other network devices on the LAN. You can fill in the IP address

assigned by ISP in the public IP address field.

DHCP Server

This page allows you to enable DHCP server on LAN interface and then your router can assign IP addresses to those

PCs connected to your router.

The ADSL Router implements a built-in DHCP (Dynamic Host Configuration Protocol) server, which dynamically

assigns IP addresses and DNS server to the PCs on the LAN. DHCP function spares you the hassle of manually

assigning a fixed IP address to each PC on the LAN. It is probably you already have a DHCP server on your network

and you do not enable this function. By default the DHCP Server is enabled on private LAN interface (192.168.1.0).

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 77 78

No comments

Siemens ADSL 500 User Manual Page 58