Siemens ADSL 500 User Manual download pdf (Page 24)

SANTIS ADSL 50/500 User Manual

Router Mode

*BRASBroadband Remote Access Server

RADIUS

Server

IP over ATM

Public IP(s)

Pre-assigned

by ISP (+ NAT)

PC(s)

BRAS

STM-1

DSLAM

ADSL

Router

Loop

ISP

Default Private IP

192.168.1.1 for

Management

AAA

Hub

Description:

In this deployment environment, we make up a private IP network of 192.168.1.1. NAT function is enabled (on

ADSL Router or use another NAT box connected to hub) to support multiple clients to access the Router and some

public servers (WWW, FTP).

If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router

and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as router IP

address and the last one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN.

For example: You are given the IP addresses 10.251.2.0 ~ 10.251.2.7. Then:

10.251.2.0 is network IP address

10.251.2.1 is assigned to router IP address.

10.251.2.7 is subnet broadcasting

10.251.2.2~10.251.2.6 can be assigned to public servers on the LAN.

Configuration:

1. Start up your browser and type 192.168.1.1 as the address to enter this ADSL web-based manager.

2. Go to Advanced User > Configuration > WAN Configuration > Create a new PVC. and select the Data

Mode –RFC1483 Routed. Then click Next button.

3. Enter the VPI/VCI values provided by your ISP and select the encapsulation type as LLC/SNAP or VC MUX.

Then click Apply.

4. Set IP configuration for Local WAN IP Address. Choose Specify an IPAddress item. Please set as the

following example,

IP Address: 10.3.80.105(should be the one that you get from ISP)

Subnet Mask: 255.255.255.248

Check on Enable NAT on this interface and click Apply.

5. Go to Configuration > LAN Configuration and set as the following

Primary IP: 192.168.1.1, Subnet Mask: 255.255.255.0

Secondary IP: 10.3.80.105, Subnet Mask: 255.255.255.248

(should be the one that you get from ISP)

Then click Apply.

6. Go to Configuration > IP Route and click Create a New Route to add a new route.

Destination Address: leave default

Netmask: leave default

Forward packets to: Interface

Then click Apply.

7. Go to Configuration > DNS and enable DNS Relay setting and click Next. On the DNS Relay web page, enter

the DNS Server IP address, for example 168.95.1.1 (you should get this value from your ISP).

8. Save the configuration from System >Save Configuration and System >Restart to restart your router for

initiating these settings.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 77 78

Comments to this Manuals

No comments

Siemens ADSL 500 User Manual Page 24

Comments to this Manuals

Related products and manuals for Hardware Siemens ADSL 500