Siemens SL84A Technical Information Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 66
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
English
32
(Continued on Next Page)
Figure 25/Ilus. 25
Special Features | Caractéristiques Spéciales | Caractísticas Especiales
5. Drying Your Dishes
Condensation Drying
After your dishwasher has washed and
rinsed your dishes, a period of condensation
drying will follow. The combination of a high
final rinse temperature, the tub’s cool
stainless steel interior, and the sheeting
action of a rinse agent results in effective
and efficient drying. Depending upon the
model dishwasher you have, after about 12
minutes of drying the LED display will show
“0”, or the “Clean” light will be illuminated.
You may then unload your dishwasher.
Some Siemens dishwasher models have an
Additional Drying Heat Option that speeds up
the condensation drying process. This
feature is explained in the Special Features
section of this manual. Check with the Model
Features Chart in this manual to find out if
your dishwasher model has this feature.
6. Unloading Your Dishwasher
Dishware tends to be hot immediately after
washing and drying. To cool your dishware
more quickly, open the dishwasher door
slightly for a few minutes before unloading.
Always unload the lower rack first and
unload the upper rack last. This will prevent
any residual water on the upper rack from
dripping onto the dishes in the lower rack,
as shown in Figure 25.
The silverware basket(s) of your Siemens
dishwasher can be easily removed for
unloading.
SPECIAL FEATURES
Most Siemens dishwashers are equipped
with special features that allow you to tailor
your dishwasher to your specific
dishwashing requirements. Not every model
of Siemens dishwashers will have all of
these features, so you should check with
the Model Features Chart on page 6 in
this manual to find out which special
features your dishwasher model has.
Rinse Aid Dispenser
The Standard Rinse Aid Dispenser Regulator
(see Figure 26) leaves our factory set at 4.
Follow these guidelines to adjust to adjust
the amount of rinse aid dispensed:
1) Open the Rinse Aid Dispenser cover, as
shown in Figure 20, page 24.
2) If your dishes are streaked after wash-
ing, turn the regulator to a lower number.
3) If your dishes are spotted after washing,
turn the regulator to a higher number.
Figure 26/Ilus. 26
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 65 66

Comments to this Manuals

No comments