Siemens Gigaset SL565 Specifications download pdf (Page 16)

First steps

Completing the VoIP settings

Your phone will restart (boot sequence) when data input is complete.

Once all settings are correct and the phone is able to establish a connection to

the VoIP server, the following will appear on the display:

You can now make calls with your phone via the Internet. Callers can reach you

via your VoIP number.

Errors and possible causes

If one of the following messages is displayed instead of the internal name after

the connection wizard is closed, an error has occurred:

u No netw.connection

u Register failed

Below you will find possible causes and measures you can take.

No netw.connection

The phone has no connection to the Internet.

¤ Check the cable connections between the phone and the router and

between the router and the Internet.

¤ Check whether the phone is connected to the LAN.

– It may not have been possible to dynamically assign an IP address to the

phone

Or:

– You have assigned a static IP address to the phone that has either already

been assigned to another LAN subscriber or does not belong to the

router's address block.

¤ Start the Web configurator with the phone's IP address.

¤ If no connection can be established, change the settings on the router

(activate DHCP server) or the phone's IP address.

01.10.2008 11:59

DE380 IP R

Please note

To ensure that you can always be reached via the Internet, the router must

be permanently connected to the Internet.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 90 91

No comments

Siemens Gigaset SL565 Specifications Page 16