Siemens Gigaset SL565 Specifications download pdf (Page 25)

Configuring the phone via the Web configurator

The Web configurator is the Web interface for your phone. It allows you to

select the settings for your phone's base unit via your PC's Web browser.

Preconditions:

u A standard Web browser is installed on the PC, such as Internet Explorer ver-

sion 6.0 or higher, or Firefox version 1.0.4 or higher.

u The phone and PC are connected to each other via a router.

With the Web configurator on your phone you can, for example:

u Configure your phone access to the local network (IP address, gateway to

the Internet).

u Configure your phone for VoIP.

u Define the data server for firmware updates and load new firmware onto the

phone if necessary.

u Copy contacts from your PC address books to your phonebook or save your

phonebook onto your PC.

u Obtain information about your phone's status (firmware version,

MAC address, etc.).

Connecting the PC to the Web configurator

¤ Launch the Web browser on your PC.

Precondition: The settings of an available firewall installed on your PC allow

the PC and phone to communicate with each other.

¤ Enter your phone's IP address, e.g., http://192.168.0.3., into the address

field of the Web browser and press the Return key.

A connection is established to the phone's Web configurator.

Please note

The phone is not blocked while you select your settings in the Web config-

urator. You can make calls with your phone at the same time.

Please note

u The IP address will appear on the display after booting if dynamic

allocation (DHCP) is activated for the IP address. The address can change

with every boot sequence.

u If the IP address is not shown on the display, you can establish it via the

phone's menu:

F ¢ Network setting B ¢ IP address B

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 90 91

No comments

Siemens Gigaset SL565 Specifications Page 25