Siemens MC55 User Manual download pdf (Page 281)

100

101

MC55 AT Command Set

11. FAX Commands

obil

MC55_ATC_V01.05 Page 281 of 469 2/10/04

Confidential / Released

11. FAX Commands

The following commands can be used for FAX transmission. If the ME is acting as a Fax-Modem to a PC-based

application (e.g. "WinFax") it is necessary to select the proper Service Class (Fax Class) provided by the ME.

The ME reports its Service Class capabilities, both the current setting and the range of services avaible. This is

provided by the

AT+FCLASS command.

Service Classes supported by ME:

The following AT commands are dummy commands:

AT+FAA Auto Answer mode

AT+FECM Error Correction Mode control

AT+FLNFC Page Length format conversion

AT+FLPL Indicate document available for polling

AT+FMINSP Minimum Phase C speed

AT+FRBC Phase C data receive byte count

AT+FREL Phase C received EOL alignment

AT+FSPL Enable polling

AT+FTBC Phase C data transmit byte count

AT+FWDFC Page width format conversion

Invoking these commands will not cause ERROR result codes, but these commands have no functionality.

11.1 FAX parameters

Parameter Description

Binary File Transfer Mode

Note: Only the default value needs to be implemented. Use test command to check which parameter values are

really possible!

[0] disable BFT

1 enable BFT

Bit Rate

0 2400 bit/s, V.27ter

1 4800 bit/s, V.27ter

2 7200 bit/s, V.29

[3] 9600 bit/s, V.29

AT+FCLASS Parameter Service class Reference, Standard

0 data modem e.g. TIA/EIA-602 or ITU V.25ter

1 Service Class 1 EIA/TIA-578-A

2 manufacture specific this document and EIA PN-2388

(draft)

<bf>

(num)

<br>

(num)

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 468 469

Comments to this Manuals

No comments

Siemens MC55 User Manual Page 281

Comments to this Manuals

Related products and manuals for Telephones Siemens MC55